Commercial Shutters

Curtain - Constructed of clear polycarbonate extrusions having a depth of 1 00mm interlocking with symmetrical aluminium extruded members of 30mm to form a continuous hinge. Each aluminium member shall be fitted with moulded end clips to prevent lateral movement and provide smooth operation of side guides.

Side Guide - 50mm x 33mm extruded aluminium with false back for concealing fixings. Optional Nylofelt Buffer available.

Locking - Shall be centrally mounted two way Mortice Key Lock or Sliding Shoot Bolt Lock mounted within the bottom rail.

Bottom Rail - 90mm x 48mm extruded aluminium section incorporating locking device and concealed locking rods and optional PVC Buffer.

Brackets - Manufactured from 90mm x 40mm mild steel.

Roller Drum - Manufactured from 229mm spiral ducted tube attached to ball bearing drum wheels rotating on a 34mm steel shaft. The shaft shall be fitted with helical springs designed to counterbalance the curtain weight throughout its operation. The drum shall be designed to give minimum deflection over the span.

Mullions - Specially designed one piece extrusion for straight openings and two piece sections that can be set to any angle and shall be used for wide openings and multiple door installations.

Mullions shall be lift out type with shoot bolts to base. Special wide mullions fabricated from aluminium sheet shall be used when two doors meet at an acute angle and no headroom exists for different mounting heights of doors (stacking).

Bundle Sizes - Neat bundle sizes.

A minimum of 100mm should be allowed below the bundle for correct door operation.

Monarch Group Pty Ltd has a continuous program of product development, sizes and configurations may change. For up to the minute specifications, please contact us.