Commercial Doors

Curtain - The curtain shall be constructed from specially designed 65mm x 40mm top & side rails and 32mm x 40mm mid rails.

These sections shall be able to accept standard glazing beads. The area created by the framing shall be glazed with 3mm or 4.5mm Acrylic Polycarbonate, 3mm Toughend Glass or Solid Panels.

Panels to be secured by glazing bead, sanoprene or PVC wedges.

Panel heights are normally an even division of the opening height (ie: 2, 4, 6, or 8) but should not exceed 600mm per panel height.

Side Guide - 140mm x 60mm extruded aluminium section with twin 3mm tracks.

Locking - Shall be centrally mounted, two way mortice key lock or motorisation is optional.

Brackets - Brackets and tracks shall be mono section configuration.

Counterbalance - Door shall be balanced by the use of torsion springs connected to a rotating shaft. The shaft ends are attached to cable drums which lift / lower the curtain via a flexible cable.

Operation - Depending on the size either manual or electrically operated.

Finish - Anodising & powdercoated colours.

In exposed areas, refer to the manufacturer for advice on waterproofing.

Monarch Group Pty Ltd has a continuous program of product development, sizes and configurations may change. For up to the minute specifications, please contact us.